Model gallery

R5 plot for King's Cross Development
1/200 scale

Model maker: Tom Taylor

This fantastic timber model is complimented with Deciduous Etched Trees produced by our Scenics Department.

Tech Hub
1/200 scale

Model maker: Scales & Models

Commissioned by Abell Nepp in 2011
Model used for the planning application and presentation purposes
Partner-in-Charge: Bruce Nepp

Victorian House

Model maker: Line-Design

A 1:100 scale full colour model of a Victorian Gothic style house with all detail show. slate roof finials fancy gable boards All laser cut in 0.8mm ply wood by our Laser Cutting Service.

Libertas Boat House

Model maker: Line-Design

This boathouse was designed by Thamesis Design & Construction Company. The model, by Line Design, is of an Edwardian style floating boat house for Bates Yard, Chertsey. The model is on permaneant display in their showroom and is used on their stand at the Boat Show each year. The interior- bathroom/kitchen/sitting room where all laser cut by our Laser Cutting Service. The boat is a Chris Craft boat made in the United States.

Berry Systems

Model maker: Line-Design

The crash barriers, all made in brass etchings by our Custom Etching team, worked like the real product ie the radiused uprights sprung back into position. All the barriers in the interior were brass etched & floors & uprights in mdf/timber.

The exterior panels are standard expanded aluminium sheet. The frame around each is a standard plastic channel.

The model has been invaluable at exhibitions around the country to demonstrate the modular parking system, Berry Systems.

Comelypark Place

Model maker: John McKenna

'The order arrived really fast, and the slates made the model I was making for my Mums 88th birthday much more real looking.'

'Is a model of the street where my Gran was born in 1889 and my Mum in 1923 and myself in 1955.'

'It's long gone now that's the reason I made it for her, a bit of nostalgia. It's my first attempt at something like this, I'm happy with the way it turned out.'

John used our 1:24 Slate Tiles on his model.

5 inch BL gun

Model maker: David Martin
Further information: here

This model is of a 5 inch BL gun Number 546 fired by my grandfather Henry Powell during the Boer War 1899-1902.

In 2005 I was invited by the Ministry of Public Works to unveil the restored gun which still exists and is identified by number.

At 1:20 scale, it was made from scratch using plans from the original handbook. The scale was chosen with regard to the ratio of barrel diameter (1 inch), angle size (4mm) and rivet diameter (062 inch). No apology for mixing up metric and imperial measurements, but I was aware of sizes available.

All plastic sheets, angles and sections and glue, paint and sandstone flags were obtained from 4D modelshop. Your staff gave meaningful advice freely and are you a credit to the model making family.

I am grateful for the advice I received each time I visited your shop.

Queen Mary 2

The QM2 kit is the Revell 1/400 scale with Gold Medal photo-etch set specifically for this kit which replaces the plastic rail set. Comes with cctv cameras, sun loungers and steamer chairs, tables, pool rails, and captain etc.

All the vehicles however are 4D modelshop white metal castings with the addition of the excavator and it`s low loader (scratch built) and Boris Johnson`s proposed new Routemaster at the foot of the dock crane!

If you have any questions regarding the construction of this magnificent model, you can contact the model maker Lloyd Ramsey here: sealegs1970@gmail.com

New Blades

You can find a gallery of New Blades models on our Flickr page here

Stuttgart Station

scale 1:150

client: Ingenhoven Architekten
Model courtesy of Amalgam Modelmaking Limited
www.amalgam-architecture.co.uk

Furniture, trees and figures supplied by 4D modelshop

Maggies Centre Model

The model is currently being used for fund raising and general public display at Charing Cross Hospital.

Design/model by Wilkinson Eyre Architects.

(trees & figures from 4D modelshop)

http://www.wilkinsoneyre.com
http://www.maggiescentres.org

Further information about the Maggies Centre Project here.

Many thanks to Wilkinson Eyre Architects for their kind permission to use these images.

All images are the copyright of Wilkinson Eyre Architects Limited.

This model was made by Marc Vinall as a collaborative project at the University of Hertfordshire using the facilities of Unit 22 Modelmakers.
(trees, figures & cars from 4D modelshop)

model courtesy of Marc Vinall
www.cityscale.co.uk
www.unit22.co.uk
University of Hertfordshire - Model Design

model courtesy of Richard Coleman & Associates (US)
www.coleman-associates.com

model courtesy of Forma (Cyprus)
www.forma3d.com.cy

model courtesy of Andy Ingham & Associates (UK)
www.andrewingham.co.uk