Individual pieces of stone suitable for use as cladding. Approx. 2mm thick simply glue into position and grout to make realistic stone walling. Actual size: Random lengths x 10, 15 & 20mm height x 2mm thick.
Use:
Make sure your wall surface is clean and dry.
Coursed Stone is supplied in 3 to 4 different widths in various length pieces, so you can lay it in regular courses or in a random way. Remember to allow 1mm for mortar joints.
Lay your stone out until you are happy with their position, remove any loose dust with a damp cloth, apply PVA to the back of each piece of stone and glue in place. Allow to dry.
Softer stone can be cut with a craft knife, simply score then snap over a straight edge. For harder stone you can use a junior hacksaw or tile pliers.
Mix equal parts PVA and water together and using a brush, paint this over your stone. Allow to dry before proceeding. Your coursed stone is now ready for grouting.
Instructions for grouting can be found on the packet of our Mortar/Grout mix. (see 'Related Products).